首页 | 本学科首页   官方微博 | 高级检索  
     

新型LED太阳模拟器光学系统设计及仿真
引用本文:张新强,张庆茂,郭亮,张志清,许毅钦. 新型LED太阳模拟器光学系统设计及仿真[J]. 应用光学, 2020, 41(1): 170-175. DOI: 10.5768/JAO202041.0105003
作者姓名:张新强  张庆茂  郭亮  张志清  许毅钦
作者单位:1.华南师范大学 信息光电子科技学院 广东省微纳光子功能材料与器件重点实验室,广东 广州 510006
基金项目:国家重点基础研究计划项目(2017YFB1104500);广东省科技项目(2014B010131004、2014B010124002、2014B090903014、2015B090920003、2016B090917002、2016B090926004、201604040006、2016A030313456);广州市科技计划项目(201707010390)
摘    要:针对现有LED太阳模拟器同时解决准直性、辐照度均匀性、光谱匹配性三大技术指标的难度较高的问题,基于光电一体化二次光学设计,提出一种简便、高效且可实现大功率的LED太阳模拟器光学系统设计方法。采用小角度准直透镜和抛物面镜来整合光源,通过混光棒和微结构进行匀光,最后利用抛物面镜实现光线的准直输出,基于同轴准直的设计思想完成LED太阳模拟器的设计。利用光学软件LightTools对LED太阳模拟器光学系统进行模拟仿真与分析优化,实验结果表明:在直径为260 mm的有效辐照面上辐照不均匀度为2.5%、准直角为1.5°。

关 键 词:LED太阳模拟器   光学设计   不均匀性   准直角   微结构
收稿时间:2019-01-25

Design and simulation of optical system for novel LED solar simulator
ZHANG Xinqiang,ZHANG Qingmao,GUO Liang,ZHANG Zhiqing,XU Yiqin. Design and simulation of optical system for novel LED solar simulator[J]. Journal of Applied Optics, 2020, 41(1): 170-175. DOI: 10.5768/JAO202041.0105003
Authors:ZHANG Xinqiang  ZHANG Qingmao  GUO Liang  ZHANG Zhiqing  XU Yiqin
Affiliation:1.Guangdong Key Laboratory of Micronano Photonic Functional Materials and Devices, School of Information and Optoelectronic Science and Engineering, South China Normal University, Guangzhou 510006, China2.Guangdong Semiconductor Industry Technology Research Institute, Guangzhou 510651, China
Abstract:In order to solve the difficult problems of collimation,irradiance uniformity and spectral matching of existing LED solar simulators,a simple,efficient and high-power optical system design method of LED solar simulator was proposed based on photoelectric integrated secondary optical design.The small angle collimating lens and the parabolic mirror were utilized to integrate the light source,and the mixing light rod and microstructure were used to homogenize the light,finally the collimating output of light was realized by the parabolic mirror.Based on the design idea of coaxial collimation,the design of the LED solar simulator was completed.In addition,the optical software LightTools was used to simulate and optimize the optical system of LED solar simulator.The experimental results show that the irradiation inhomogeneity is 2.5%and the collimation angle is 1.5°on the effective irradiation surface with a diameter of 260 mm.
Keywords:LED solar simulator  optical design  inhomogeneity  collimated angle  microstructure
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《应用光学》浏览原始摘要信息
点击此处可从《应用光学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号