| Abstract: | Phase transition of the layer structure of poly(p-benzenedithiol-co-p-diethylbenzene) obtained in solid state polymerization was studied by a thermal treatment or UV irradiation under a nitrogen atmosphere. The peak intensities in the X-ray diffraction diagram of polymers gradually decreased with the thermal treatment time above 55°C. Below 50°C the layer structure of polymers hardly changed. The apparent activation energy for the phase transition was about 15 Kcal/mol [63 KJ/mol] at the initial stage and gradually decreased to a few Kcal/mol [ca. 2 KJ/mol]. UV light from a high-pressure mercury lamp also gradually induced the phase transition from the layer structure to an amorphous one. The pristine polymer possesses phase transition points at 75, 95 and 130°C. The exothermic transition at 75°C can be understood as the thermal destruction of the semistable layer structure. The exothermic transition at 95°C may be correspond to the cis → trans thermal isomerization of the C?°C bond in the polymer main chain. The diffuse reflectance spectrum of the pristine polymer differed from that of the amorphous polymer obtained by the thermal treatment of the pristine polymer. SEM photographs of the pristine polymer showed a particular surface structure, i.e. entangled fibrous material. TEM photographs of the pristine polymer exhibited a bright valley-and-hill structure, whereas that of the amorphous polymer obtained by thermal treatment exhibited a plain surface. |
