| 离心压气机回流器三维气动优化设计 |
| |
| 引用本文： | 何坤,袁新.离心压气机回流器三维气动优化设计[J].工程热物理学报,2010(3). |
| |
| 作者姓名： | 何坤 袁新 |
| |
| 作者单位： | 清华大学热科学与动力工程教育部重点实验室; |
| |
| 基金项目： | 国家自然科学基金资助项目(No.50676043);;国家重点基础研究发展计划(973计划)资助项目(No.2007CB210108) |
| |
| 摘 要： | 回流器作为多级离心压气机两级间非常重要的连接部件,其内部的二次流动十分显著。回流器的设计目标是以尽可能小的损失对上一级出口气体进行整流,减小下级叶轮进口处的流场畸变。本文通过对回流器流道和整流叶栅进行参数化建模,采用多岛遗传算法对某多级离心压气机回流器进行基于N-S方程数值求解的三维气动优化设计,着力于提高变工况条件下回流器的级等熵效率以及使变工况条件下回流器的出口气流角尽可能均匀。
|
| 关 键 词： | 离心压气机 回流器 气动优化设计 |
AERODYNAMIC OPTIMIZATION DESIGN OF THE RETURN CHANNEL IN CENTRIFUGAL COMPRESSOR |
| |
| HE Kun YUAN Xin.AERODYNAMIC OPTIMIZATION DESIGN OF THE RETURN CHANNEL IN CENTRIFUGAL COMPRESSOR[J].Journal of Engineering Thermophysics,2010(3). |
| |
| Authors: | HE Kun YUAN Xin |
| |
| Institution: | Key Laboratory for Thermal Science and Power Engineering of Ministry of Education;Tsinghua Univ.;Beijing 100084;China |
| |
| Abstract: | The return channel,in which the secondary flow is highly significant,is a very important connection part between two stages in the multistage centrifugal compressor.The main purpose of the return channel design is to rectify the outlet swirling flow from the former stage with possible little flow loss before it entering the impeller of the next stage.In this work,by parametrically modelling of the meridional path and return vanes,three-dimensional aerodynamic optimization design of the return channel in mul... |
| |
| Keywords: | centrifugal compressor return channel aerodynamic optimization design |
| 本文献已被 CNKI 等数据库收录！ |
