首页 | 本学科首页   官方微博 | 高级检索  
     

与偏振无关的1×4光开关
引用本文:赵清,阮玉,马晓东,王健. 与偏振无关的1×4光开关[J]. 光学与光电技术, 2004, 2(3): 37-40
作者姓名:赵清  阮玉  马晓东  王健
作者单位:1. 华中科技大学光电子工程系,武汉,430074
2. 福州康顺公司,福州,350007
摘    要:提出了一种基于折射棱镜与偏振无关的 1×4 光开关的设计及应用,主要介绍了该器件的结构、原理及误差分析,该器件采用一个单光纤准直器和两个双光纤准直器对光路进行耦合,并利用继电器带动折射棱镜灵活切换光路。该器件主要用于光网络系统之间的互联和光网络的保护、备份上,实验结果表明具有体积小、插损低、可靠性好等特点。

关 键 词:光网络  光开关  误差分析  光分插复用  准直器
文章编号:1672-3392(2004)03-37-04
收稿时间:2003-10-24
修稿时间:2003-10-24

A1×4 Mechanical Optical Switch
ZHAO Qing RUAN Yu MA Xiao-dong WANG Jian. A1×4 Mechanical Optical Switch[J]. optics&optoelectronic technology, 2004, 2(3): 37-40
Authors:ZHAO Qing RUAN Yu MA Xiao-dong WANG Jian
Affiliation:ZHAO Qing1 RUAN Yu1 MA Xiao-dong1 WANG Jian2
Abstract:A refractor-based 1×4 switch is developed, and its structure, principles and the factors that affect the repeatability of the device operation are described. It is independent of polarization. Adopting a single fiber-optic collimator and two dual fiber-optic collimators to couple the light paths and driving the refractor by means of a relay, the flexible switch operation can be realized. It is mainly used in optic network system connection,protection and back up. The experimental and measuring results show that the device is a small one with low loss and good reliability.
Keywords:optic network  optic switch  repeatability  OADM  collimator  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号