首页 | 本学科首页   官方微博 | 高级检索  
     检索      

火花直读光谱法测定铝及铝合金中的钒含量
引用本文:陈国成,黎应芬.火花直读光谱法测定铝及铝合金中的钒含量[J].中国无机分析化学,2017,7(3):59-61.
作者姓名:陈国成  黎应芬
作者单位:广东省佛山市质量计量监督检测中心,广东佛山,528000
摘    要:通过对测定条件的优化,采用高钒系列标准样品建立分析程序,完成类型标准化,校验后再进行测定,建立了火花直读光谱法对铝及铝合金中的钒含量进行测定的方法。选用E2235高钒标准样品进行标准化,所得测定值与标准值基本一致,相对标准偏差为2.9%(n=8)。结果表明,当测定元素含量不超过0.020%时,方法准确、可靠,适合于铝及铝合金中微量钒含量的测定。

关 键 词:铝及铝合金    火花直读光谱法  类型标准化
收稿时间:2017/3/8 0:00:00
修稿时间:2017/6/13 0:00:00

Determination of Vanadium Content in Aluminum and Aluminum Alloys by Spark Emission Spectrometry
CHEN Guocheng and LI Yingfen.Determination of Vanadium Content in Aluminum and Aluminum Alloys by Spark Emission Spectrometry[J].Chinese Journal of Inorganic Analytical Chemistry,2017,7(3):59-61.
Authors:CHEN Guocheng and LI Yingfen
Institution:Foshan Supervision and Testing Centre of Quality and Metrology, Foshan, Guangdong 528000, China and Foshan Supervision and Testing Centre of Quality and Metrology, Foshan, Guangdong 528000, China
Abstract:A method was developed for the determination of vanadium (V) in aluminum samples at optimized test conditions. A program was established for standardization and was used after verification. The analytical results agreed with the standard value for the high vanadium standard sample of E2235. The relative standard deviation of this method using spark emission spectrometry was 2.9 % (n=8). The results show that the method is accurate for analyte concentration less than 0.020 %. The proposed method is reliable and suitable for determining trace amounts of V in aluminum and aluminum alloys.
Keywords:aluminum and aluminum alloy  vanadium  spark emission spectrometry  type standardization
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《中国无机分析化学》浏览原始摘要信息
点击此处可从《中国无机分析化学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号