| W18Cr4V钢表面离子氮碳共渗-离子渗硫复合处理渗层的摩擦磨损性能研究 |
| |
| 引用本文： | 朱张校,关磊,曲泽阳. W18Cr4V钢表面离子氮碳共渗-离子渗硫复合处理渗层的摩擦磨损性能研究[J]. 摩擦学学报, 1999, 19(2) |
| |
| 作者姓名： | 朱张校 关磊 曲泽阳 |
| |
| 作者单位： | 清华大学机械工程系,北京,100084 |
| |
| 基金项目： | 清华大学摩擦学国家重点实验室基金 |
| |
| 摘 要： | 研究了Ｗ１８Ｃｒ４Ｖ钢离子氮碳共渗－离子渗硫复合处理渗层的摩擦磨损性能．在环－块摩擦磨损试验机上测定复合渗层与ＧＣｒ１５钢对摩时的摩擦系数，在往复式滑动磨损试验机上进行磨损试验．采用扫描电镜（ＳＥＭ）对磨损表面进行形貌分析．试验结果表明：复合渗层与ＧＣｒ１５钢对摩时的摩擦系数比未处理的Ｗ１８Ｃｒ４Ｖ钢与ＧＣｒ１５钢的低．由于复合渗层中的氮碳化合物和硫化物降低了摩擦系数和粘着倾向，复合渗层的耐磨性高于未处理的Ｗ１８Ｃｒ４Ｖ钢
|
| 关 键 词： | 离子氮碳共渗 离子渗硫 W18Cr4V钢 复合处理 摩擦磨损 |
Study on Friction and Wear Characteristics of Compound Layer of W18Cr4V Steel by Combined Treatment of Ion Nitrocarburizing-Ion Sulphurizing |
| |
| ZHU Zhang-xiao,GUAN Lei,QU Ze-yang. Study on Friction and Wear Characteristics of Compound Layer of W18Cr4V Steel by Combined Treatment of Ion Nitrocarburizing-Ion Sulphurizing[J]. Tribology, 1999, 19(2) |
| |
| Authors: | ZHU Zhang-xiao GUAN Lei QU Ze-yang |
| |
| Affiliation: | Department of Mechanical Engineering Tsinghua University Beijing 100084 China |
| |
| Abstract: | The friction and wear characteristics of the surface compound layer of W18Cr4V steel by combined treatment of ion nitrocarburizing ion sulphurizing were investigated. The friction coefficient of the compound layer against GCr15 steel was determined with a block ring friction tester. The wear test was carried out with a reciprocating wear tester. The worn surface was analyzed by scanning electron microscopy(SEM). The experimental results revealed that the friction coefficient was lower for treated W18Cr4V steel against GCr15 steel. The wear resistance of the compound layer was higher because the nitrocarbonide and the sulphide in the compound layer were capable of friction reduction and adhesion inhibition. |
| |
| Keywords: | ion nitrocarburizing ion sulphurizing W18Cr4V steel combined treatment friction and wear |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
