| 一种高灵敏度的桥型声表面波应变传感器 |
| |
| 引用本文： | 李鹏旭,李红浪,程利娜,卢孜筱,罗为,刘久玲.一种高灵敏度的桥型声表面波应变传感器[J].应用声学,2021,40(2):237-242. |
| |
| 作者姓名： | 李鹏旭 李红浪 程利娜 卢孜筱 罗为 刘久玲 |
| |
| 作者单位： | 中国科学院声学研究所,国家纳米科学中心,中国科学院声学研究所,国家纳米科学中心,华中科技大学,中国科学院声学研究所 |
| |
| 基金项目： | 国家重点基础研究发展计划（973计划） |
| |
| 摘 要： | 为了提高声表面波传感器应变灵敏度,该文提出了一种桥型声表面波应变传感器.首先根据受压弯曲构件中应变分布特点设计了桥型声表面波应变传感器,并建立有限元模型,结合微扰法分析了桥型结构几何参数与声表面波应变传感器灵敏度的关系.根据分析结果确定桥型声表面波应变传感器几何结构参数,并与传统声表面波应变传感器的应变灵敏度进行了对比...
|
| 关 键 词： | 声表面波 应变传感器 受压弯曲 桥型结构 应变灵敏度 |
| 收稿时间： | 2020/6/6 0:00:00 |
| 修稿时间： | 2021/3/2 0:00:00 |
A high sensitivity bridge surface acoustic wave strain sensor |
| |
| LI Pengxu,Li Honglang,CHENG Lin,LU Zixiao,LUO Wei and LIU Jiuling.A high sensitivity bridge surface acoustic wave strain sensor[J].Applied Acoustics,2021,40(2):237-242. |
| |
| Authors: | LI Pengxu Li Honglang CHENG Lin LU Zixiao LUO Wei and LIU Jiuling |
| |
| Institution: | Institute of Acoustics, Chinese Academy of Sciences,The National Center for Nanoscience and Technology,Institute of Acoustics, Chinese Academy of Sciences,The National Center for Nanoscience and Technology,Huazhong University of Science and Technology,Institute of Acoustics, Chinese Academy of Sciences |
| |
| Abstract: | In this paper,a bridge surface acoustic wave(SAW)strain sensor is proposed to improve the strain sensitivity of the SAW strain sensor.First,a bridge SAW strain sensor is designed based on the characteristics of the strain distribution in the straight beam under bending.The finite element model of the bridge SAW strain sensor is established,and the relationship between the geometric parameters of the bridge structure and the sensitivity of the SAW strain sensor is analyzed combined with the perturbation method.Then the geometric structure parameters are determined according to the analysis results,and the strain sensitivities of the bridge SAW strain sensor and traditional SAW strain sensor are compared and analyzed in detail.Eventually,a micro-motion platform is built to carry out the experimental research.The results indicates that,the strain sensitivity under bending compression of the Y34°cut bridge SAW sensor is 1692 Hz/με,while thatof the traditional SAW sensor is 1328 Hz/με.The sensitivity of the bridge SAW strain sensor is significantly improved compared to the traditional sensor. |
| |
| Keywords: | surface acoustic wave strain sensor bend deformation bridge structure strain sensitivity |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《应用声学》浏览原始摘要信息 |
| 点击此处可从《应用声学》下载免费的PDF全文 |
|
