Accelerated ageing due to moisture absorption of thermally cured epoxy resin/polyethersulphone blends. Thermal, mechanical and morphological behaviour

A model epoxy resin/anhydride system, modified with a polyethersulfone (PES) engineering thermoplastic toughening agent, has been studied under hydrothermal ageing in order to investigate the modification of the thermal, morphological and mechanical behaviour through dynamical mechanical thermal analysis, SEM microscopy and fracture toughness test respectively. Two different concentrations of the toughening agent were used in the blends and two ageing conditions have been considered, consisting of the immersion of the samples in distilled water at constant temperature of 70 °C for 1 week and for 1 month. Dynamical mechanical thermal analysis results on hydrothermally aged materials indicated the occurrence of progressive segregation effects with the formation of regions with different cross-linking degrees.Fracture toughness tests showed an increase of the K_IC value with the increase of the toughening agent concentration, revealing both a dramatic decrease of the same parameter after 1 week ageing for all the materials and the tendency to reach an almost constant value after 1 month ageing for all the formulations, with a slight increase with respect to 1 week ageing. These results have been interpreted on the basis of the SEM analysis, showing the presence of a well defined micrometric PES particles distribution in the epoxy/anhydride matrix, and discussed in the light of different water absorption mechanisms at short and long ageing times.