Effects of tertiary amines and quaternary ammonium halides in polysulfone on membrane gas separation properties

Polymers containing CO₂‐philic groups are of great interest for CO₂/light gas separation membranes because the affinity toward CO₂ can effectively increase CO₂ solubility and thus permeability. In this study, polysulfones (PSUs) modified with different degrees of benzyldimethylamine (DMA), benzyltrimethylammonium fluoride (TMAF), and benzyltrimethylammonium iodide (TMAI) were synthesized using sequential post‐functionalization reactions and investigated for CO₂/N₂ and CO₂/CH₄ separation. The physical properties of these polymers were studied, including density, fractional free volume, and glass transition temperature. In contrast to the conventional wisdom that tertiary amines exhibit an affinity toward CO₂, this study convincingly shows that the DMA substituent has a minimal impact on CO₂ solubility and CO₂/light gas solubility selectivity in PSUs under dry condition. On the other hand, incorporating TMAF and TMAI in PSU significantly increases CO₂ solubility. Particularly, introducing TMAI with a molar ratio of 1.07 relative to PSU repeating units increases CO₂/CH₄ solubility from 4.4 to 5.2, CO₂/CH₄ permeability selectivity from 21 to 45, and CO₂/N₂ permeability selectivity from 24 to 33 at 35 °C, while the CO₂ permeability decreases from 5.6 to 1.7 Barrers. The effect of these functional groups in PSUs on gas diffusivity and diffusivity selectivity can be satisfactorily described by the free volume model. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1239–1250