首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于线阵CCD的光学测角嵌入式系统设计
引用本文:程瑶,赵建,米曾真.基于线阵CCD的光学测角嵌入式系统设计[J].应用光学,2018,39(5):650-654.
作者姓名:程瑶  赵建  米曾真
作者单位:重庆理工大学 机械工程学院,重庆 400050
基金项目:国家自然科学基金51505052国家自然科学基金51505053重庆市科委基础与前沿研究一般项目cstc2016jcyjA0497重庆市科委基础与前沿研究一般项目cstc2015jcyjA40051重庆市教委科学技术研究资助项目KJ1500935重庆市教委科学技术研究资助项目KJ1500931重庆市教委科学技术研究资助项目KJ1500617
摘    要:CCD作为一种光电转换器件,具有成本低、结构简单、扫描速度快、频率响应高等优点,越来越广泛地运用到测量领域。提出采用单色线阵CCD,以非接触的光学方式对角度信息进行编码调试,通过采集该信号利用数据处理模块,完成对图像信号的解调,实现角度值的测量。系统选用TSL1401和LPC2138为核心构成嵌入式测量系统,利用TSL1401采集信号,通过A/D传输到LPC2138中进行数据处理,最终得到角度值。系统通过光学的方式对角度进行测量,实现了非接触式测量。

关 键 词:非接触测量    角度测量    线阵CCD    LPC2138
收稿时间:2018-02-27

Design of embedded system for optical angle measurement based on linear array CCD
Institution:College of Mechanical Engineering, Chongqing University of Technology, Chongqing 400050, China
Abstract:As a photoelectric converter, charge coupled device (CCD) is widely used in the field of measurement because of its low cost, simple structure, fast scanning speed and high frequency response. It was proposed to use a monochrome linear array CCD to encode and debug the angle information in a non-contact optical manner.By collecting this signal and using the data processing module, the demodulation of the image signal was accomplished, and the angle measurement was realized. The system used TSL1401 and LPC2138 as the core to form an embedded measurement system, which used the TSL1401 to collect signals, then transferred them to the LPC2138 for data processing through A/D, and finally obtain the angle values. Through the optical measurement of angle, a new method of non-contact measurement was realized.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《应用光学》浏览原始摘要信息
点击此处可从《应用光学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号