Measurement of the temperature profile during shear band formation in steels deforming at high strain rates |
| |
| Institution: | 1. State Key Laboratory Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China;2. Explosion Protection and Emergency Disposal Technology Engineering Research Center of the Ministry of Education, Beijing Institute of Technology, Beijing 100081, China;3. Applied Mechanics Laboratory, School of Aerospace Engineering, Tsinghua University, Beijing 100084, China;1. Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, 32000 Haifa, Israel;2. Rafael, POB 2250 (774), Haifa 3102102, Israel |
| |
| Abstract: | A torsional Kolsky bar (split-Hopkinson bar) was used to deform tubular specimens of AISI 1018 cold rolled steel and AISI 1020 hot rolled steel at a nominal strain rate of 103s−1. Shear bands were observed to form in both steels, and the temperature of the material in the bands was measured by determining the infrared radiation emitted at the metal surface. For this purpose, a linear array of ten indium-antimonide detectors was used to determine temperature history at ten neighboring points lying across the projected path of the shear band. Results showed that shear bands in these steels are relatively wide, that the maximum temperature rise in the band is about 450°C and that the temperature distribution across the band is consistent with results of stability analyses. The two steels have very different work hardening rates and the strain at which localization is first observed is very different for the two steels : in the cold-rolled steel it occurs at about 15% strain, while in the hot-rolled the strain is near 100%. This result also is consistent with predictions of the analyses. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
