首页 | 本学科首页   官方微博 | 高级检索  
     检索      

直流磁控反应溅射法制备工艺参数对TiO2薄膜光催化性能的影响
引用本文:赵琳,QIU Jia-wen,何延春.直流磁控反应溅射法制备工艺参数对TiO2薄膜光催化性能的影响[J].人工晶体学报,2008,37(4):857-861.
作者姓名:赵琳  QIU Jia-wen  何延春
作者单位:兰州物理研究所表面工程技术国家级重点实验室,兰州,730000;National Key Laboratory of Surface Engineering,Lanzhou Institute of Physics, Lanzhou 730000, China
摘    要:采用直流磁控反应溅射法在未加热衬底上沉积TiO2薄膜,以紫外灯为光源进行了薄膜光催化降解亚甲基蓝溶液的实验,研究了沉积工艺参数和后处理退火温度对薄膜光催化性能的影响.结果表明:经过500℃退火、厚度较大的薄膜样品光催化效率较高;膜厚基本相同的样品,沉积时电源功率较小、Ar/O2流量比例较小的薄膜光催化效率较高.

关 键 词:TiO2薄膜  磁控溅射  光催化  制备工艺参数  

Effect of Preparation Parameters on Photocatalytic Activity of TiO2 Films Prepared by DC Reactive Magnetron Sputtering Method
ZHAO Lin,QIU Jia-wen,HE Yan-chun.Effect of Preparation Parameters on Photocatalytic Activity of TiO2 Films Prepared by DC Reactive Magnetron Sputtering Method[J].Journal of Synthetic Crystals,2008,37(4):857-861.
Authors:ZHAO Lin  QIU Jia-wen  HE Yan-chun
Abstract:TiO2 thin films were deposited by direct current (DC) magnetron reactive sputtering without external heating. Photocatalytic activity of the samples was tested by degradation of methylene blue solution under irradiation of a UV lamp. The effect of different preparation parameters on photocatalytic activity was investigated. The results show that the thicker film annealed at 500 ℃ has better photocatalytic activity; Thin films deposited with lower source power and lower Ar/O2 flow ratio display better photocatalytic activity when their thicknesses are similar.
Keywords:TiO2 thin films  maganetron sputtering  photocatalytie  preparation parameter
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《人工晶体学报》浏览原始摘要信息
点击此处可从《人工晶体学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号