Determination of polar aniline derivatives in aqueous environmental samples using on-line liquid chromatographic preconcentration techniques

Summary On-line precolumn sample handling is used to enrich polar aniline derivatives in order to preconcentrate them prior to their separation. Liquid-solid extraction is possible with a cation-exchanger precolumn after acidification of water samples at pH 3 and a clean-up in order to remove the high amounts of inorganic cations present in natural samples. Since inorganic removal cannot be total, overloading of the ion exchanger occurs rapidly. The volume which can be directly percolated through the cation-exchanger precolumn cannot exceed 30 ml and the amount preconcentrated is not sufficient for a determination at the 100 ppt level. A two-step preconcentration procedure is carried out in order to increase the sample volume: the direct percolation of samples through the cation-exchanger precolumn is avoided and the clean-up step is no longer necessary. Aniline derivatives are preconcentrated in their neutral form at pH 7 by a 9-cm long column packed with the copolymer-based PRP-1 sorbent; then, a small volume of water-methanol at pH 2 allows the cationic compounds alone to be desorbed from the PRP-1 column in their protonated form and to be transferred to a 1-cm long cation-exchanger precolumn. This precolumn is then coupled to an analytical C18 column and its content on-line analysed by an acetonitrile gradient. The PRP-1 column acts as a powerful filter to many neutral interferents and aniline derivatives can be thus determined from 150-ml drinking water samples with 10–50 ppt UV detection limits.Dedicated to Roland W. Frei