Study of the formation of the apatite-type phases La9.33+x(SiO4)6O2+3x/2 synthesized from a lanthanum oxycarbonate La2O2CO3

Lanthanum silicated apatites with nominal composition La_9.33+x(SiO₄)₆O_2+3x/2 (?0.2 < x < 0.27) have been successfully synthesized by solid state reaction using a new reagent La₂O₂CO₃ and amorphous SiO₂ precursors. The formation mechanism of La₂O₂CO₃ reagent, which cannot be purchased, has been followed by in-situ temperature depend XRD of La₂O₃ under CO₂ atmosphere. The stability of this reagent during the synthesis step allowed to limit the formation of secondary phase La₂Si₂O₇ and made the weighting of the reagent easier. High purity powders could be synthesized at the temperature of 1400 °C. Dense pellets (more than 98.5%) were obtained by isostatic pressing of powders calcined at 1200 °C and then sintered at 1550 °C. Traces of La₂SiO₅ secondary phase present in synthesized powder disappeared after densification and pure oxyapatite materials were obtained for all the compositions. Electrical measurements confirmed that conductivity behaviors of the sintered pellets were dependent to the oxygen over-stoichiometry. Indeed, a relatively high conductivity of 1 × 10^?2 S cm^?1 was exhibited at 800 °C for the nominal composition La_9.60(SiO₄)₆O_2.405 with low activation energy around 0.79 eV. The ionic conductivity properties were comparable with that of the earlier obtained materials.