Highly Luminescent Red Phosphorescent OLED with Interfacial Layers for Hole Transport and Electron Injection |
| |
Authors: | Jun Ho Lee Jae Min Kim |
| |
Institution: | Department of Electronics Engineering, Dankook University, Chungnam, Korea |
| |
Abstract: | Four kinds of red phosphorescent organic light-emitting devices were fabricated and compared to investigate the effect of interfacial layers for hole transport and electron injection. 1 nm-thick LiF in the device A and C and 1 nm-thick Cs2CO3 in the device B and D were deposited as an electron injection layer between the anode and the electron transport layer, and 5 nm-thick layer of dipyrazion2,3-f:2′,2′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrileHATCN] was inserted as a hole transport interfacial layer between the hole injection layer and the hole transport layer only in the device C and D. Under a luminance of 1000 cd/m2, the power efficiencies were 7.6 lm/W and 8.5 lm/W in the device A and B, and 8.6 lm/W and 13.4 lm/W in the device C and D. The quantum efficiency of the device D was 15.8% under 1000 cd/m2 which was somewhat lower than those of the device A and C, but a little higher than that of the device B. The luminance of the device D was much higher than those of the other devices at a given votage. The luminance of the device D at 7 V was 23,710 cd/m2, which was 13.0, 3.4, and 4.0 times higher than those of the device A, B, and C at the same voltage, respectively. |
| |
Keywords: | PhOLED interfacial layer HATCN Cs2CO3 luminance quantum efficiency |
|
|