Characterisation of filled rubber with a pronounced non-linear viscoelasticity

This contribution presents the characterisation of an incompressible carbon black-filled elastomer as one characteristical example for highly filled rubber. It shows a strongly pronounced non-linear viscoelastic behaviour and the most important characteristic is the extremely long relaxation time which has to be taken into account. The material model is developed with respect to uniaxial tension data. The basis in the development of a phenomenological model is given by the basic elasticity. For this evaluation the long term relaxation behaviour results in a complex experimental procedure. Therefore, special attention has to be paid according to an optimised experimental process in order to get the necessary reference data in an adequate and reproduceable way [1]. With this model basis further investigations are taken into account concerning the time-dependent viscoelasticity. Therefore, cyclic deformations from zero up to a maximum of deformation are considered for different strain rates. Furthermore, the relaxation behaviour is investigated for multiple strain levels. The phenomena which are observed in the experimental results yield in a purely viscoelastic model, based on a rheological analogous model consisting of an equilibrium spring and several Maxwell-elements which contain nonlinear relations for the relaxation times of the dashpot elements [1,2]. The material model's numerical realisation is accomplished in two ways. Because of its numerical simplicity especially according to the parameter identification the model is restricted only to the simple case of uniaxial tension. A second, alternative implementation is executed providing the benefit that more complex deformation conditions can also be taken into account. Therefore, the general, three-dimensional finite model is implemented in an open-source Finite Element library [3]. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)