Polymer matrix influence on stability of wood polymer composites |
| |
Authors: | Renata Porebska Andrzej Rybak Barbara Kozub Robert Sekula |
| |
Affiliation: | 1. ABB Corporate Research Center, Cracow, Poland;2. Faculty of Mechanical Engineering, Cracow University of Technology, Cracow, Poland |
| |
Abstract: | The aim of the presented work is to show the influence of the various polymer matrices and the different amounts of the cellulose filler on the composites properties. Samples based on polypropylene, polystyrene, polyoxymethylene, acrylonitrile butadiene styrene, polyester resin, and polylactic acid with different contents of cellulose fibers were prepared by injection molding process. The mechanical and dielectric properties of these composites were studied in order to check whether investigated wood polymer composites fulfill requirements for their application in electrical devices. For all tested composites, a linear increase of modulus with cellulose content was observed. Addition of cellulose to the tested polymers significantly reduces strain at break. In the case of polypropylene and polyoxymethylene composites, the tensile strength increases with the content of the filler. For other materials, there is an inverse relationship, namely the addition of cellulose decreases the tensile strength. The electrical strength decrease was observed with increased cellulose content for the majority of the investigated composites. Polar groups incorporated by cellulose fibers have led to dielectric constant increase. Furthermore, aging of composites in mineral oil and evaluation of water uptake for wood–plastic samples were performed. Wood polymer composites have changed significantly after aging. The water diffusion coefficients were determined, and the significant influence of the amount of cellulose on the water absorption was shown. Copyright © 2015 John Wiley & Sons, Ltd. |
| |
Keywords: | wood polymer composites dielectric tests polymer aging water uptake |
|
|