首页 | 本学科首页   官方微博 | 高级检索  
     

65T脉冲强磁体设计与实验研究
引用本文:彭涛,李亮. 65T脉冲强磁体设计与实验研究[J]. 强激光与粒子束, 2010, 22(1). DOI: 10.3788/HPLPB20102201.0225
作者姓名:彭涛  李亮
作者单位:华中科技大学 强磁场中心, 武汉 430074
基金项目:国家自然科学基金,科技部国际合作项目 
摘    要:研制并实验测试一台65T脉冲强磁场磁体。磁体线圈采用14层纯铜导线与Zylon纤维交替缠绕而成,内绕组采用分布式加固技术,实现应力分布的优化,外层由不锈钢套筒与碳纤维加固。内外绕组分别采用两种不同横截面导线平衡能量分布,实现内外绕组温度分布相对均匀,避免局部过热。磁体孔径为12mm,高为120mm,通过1MJ/3.2mF/25kV高储能密度电容器供电,在20.6kV电压时,获得了磁感应强度为65T、持续时间为20ms的脉冲磁场。

关 键 词:脉冲磁体  强磁场  线圈  温升  应力
收稿时间:1900-01-01;

Design and experiments of 65 T high field pulsed magnet
Peng Tao,Li Liang. Design and experiments of 65 T high field pulsed magnet[J]. High Power Laser and Particle Beams, 2010, 22(1). DOI: 10.3788/HPLPB20102201.0225
Authors:Peng Tao  Li Liang
Affiliation:High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan 430074, China
Abstract:A 65 T pulsed magnet has been manufactured and tested. The magnet coil consists of 14 layers of pure copper. Each layer of copper wire is reinforced with a layer of Zylon fiber composite. The thickness of the Zylon layer in the inner section is optimized so that the stress is even. In order to balance energy distribution and avoid overheating, two different cross-section copper wires are used in the inner and outer sections, respectively. The coil is 120 mm long with a bore of 12 mm diameter. Its power is s...
Keywords:pulsed magnet  high magnetic field  coil  temperature rise  stress
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号