| 6H-SiC成核表面形貌与缺陷产生的研究 |
| |
| 引用本文： | 王英民,宁丽娜,彭燕,徐化勇,胡小波,徐现刚. 6H-SiC成核表面形貌与缺陷产生的研究[J]. 人工晶体学报, 2009, 38(1): 7-10 |
| |
| 作者姓名： | 王英民 宁丽娜 彭燕 徐化勇 胡小波 徐现刚 |
| |
| 作者单位： | 山东大学晶体材料国家重点实验室,济南,250100 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)，山东省自然科学基金，国家自然科学基金 |
| |
| 摘 要： | 利用光学显微镜观察了6H-SiC晶体成核表面形貌,并使用高分辨X射线衍射法检测了不同区域的结晶质量.根据表面形貌的不同将成核表面分为三个区域:平台区、斜坡区、凹坑区.平台区的结晶质量最好,斜坡区和凹坑区由于缺陷(例如微管、小角晶界和多型夹杂等)的存在导致结晶质量变差.依据温场分布以及籽晶的固定分析了凹坑产生的可能原因.根据观察纵切片发现源于斜坡区以及凹坑区的缺陷随着晶体的生长继承到晶体内部导致后期生长的晶体质量变差.最后我们提出了通过优化成核温场分布以及改善籽晶固定方法来提高晶体成核质量的思路.
|
| 关 键 词： | 6H-SiC 成核 表面形貌 缺陷, |
Analysis on Surface Morphology and Defect Generation at the Initial Stages of 6H-SiC Sublimation Growth |
| |
| WANG Ying-min,NING Li-na,PENG Yan,XU Hua-yong,HU Xiao-bo,XU Xian-gang. Analysis on Surface Morphology and Defect Generation at the Initial Stages of 6H-SiC Sublimation Growth[J]. Journal of Synthetic Crystals, 2009, 38(1): 7-10 |
| |
| Authors: | WANG Ying-min NING Li-na PENG Yan XU Hua-yong HU Xiao-bo XU Xian-gang |
| |
| Affiliation: | State Key Laboratory of Crystal Materials;Shandong University;Jinan 250100;China |
| |
| Abstract: | The surface morphology and defects generation at the initial stage of 6H-SiC crystals growth had been studied by optical microscopy,high resolution X-ray diffractometry(HRXRD).The whole surface can be divided into flat,slope and hill-valley regions according to the morphology.It could be confirmed that the defects such as micropipes,low angle grain boundaries,and polytype inclusions were induced at the slope region and "hill-valley" region whereas the quality of flat region was better than those at the othe... |
| |
| Keywords: | 6H-SiC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《人工晶体学报》浏览原始摘要信息 |
|
点击此处可从《人工晶体学报》下载全文 |
|
