首页 | 本学科首页   官方微博 | 高级检索  
     

碳化硅颗粒增强铝合金复合材料在不同条件下的磨损行为
引用本文:梁亚南 杨生荣. 碳化硅颗粒增强铝合金复合材料在不同条件下的磨损行为[J]. 摩擦学学报, 1995, 15(4): 289-293
作者姓名:梁亚南 杨生荣
作者单位:中国科学院金属研究所,中国科学院兰州化学物理研究所固体润滑开放研究实验室
基金项目:国家自然科学基金,中国科学院兰州化学物理研究所固体润滑开放研究实验室资助
摘    要:动载磨损是工程应用的一种常见现象,然而已有的试验研究大都是以平稳加方式进行的,这样得到的磨损规律显然与实际工况下的不符。因此,利用滑动磨损和喷砂冲员两种不同的试验方法,对SiC颗粒增强2024Al复合材料的磨损行为进行了试验研究。

关 键 词:复合材料 磨损 碳化硅 铝合金

Wear Behavior of SiC-Reihforced Aluminum Alloy composites in Various Conditions
Liang Yanan,Li Shizhuo,Ma Zongyi,Li Shu. Wear Behavior of SiC-Reihforced Aluminum Alloy composites in Various Conditions[J]. Tribology, 1995, 15(4): 289-293
Authors:Liang Yanan  Li Shizhuo  Ma Zongyi  Li Shu
Affiliation:Liang Yanan; Li Shizhuo; Ma Zongyi; Li Shu(Instttute of Metal Research Chinese Academy of Sciences She1nang 110015 China)Yang Shengrong(Laboratory of Solid Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences Lanzhou 730000 China)
Abstract:Dynamic wear is common phenomenon in engineering practices. But most of theprevious studies used to be carried out in a steady loading condition,and the results would notbe accorded with what happenned in practice. Therefore,wear behavior of SiCp/2024Al com-posites has been investigated in two tests with different loadings :1)sliding wear;2)sand-blasting erosion. The results showed that in the sliding wear test with a steady load,the wearresistance of composites was remarkably better than that of the matrix alloys and increasedwith increasing volume fraction and size of SiC;on the contrary,in the erosion test with animpact load,the wear resistance of the composites was much worse than that of the matrix al-loys,and decreased with increasing volume fraction and size of SiC.
Keywords:SiC particle  composite  wear
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《摩擦学学报》浏览原始摘要信息
点击此处可从《摩擦学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号