马尾松木材褐腐降解的红外光谱研究

用傅立叶变换红外光谱(FTIR)研究了马尾松木材被茯苓褐腐菌降解过程中化学成分的变化。测量了木质素和综纤维素的相关红外吸收峰的峰高比值,用湿化学方法测定了未褐腐和不同褐腐时间木材的Klason木质素含量和综纤维素含量,分析了红外吸收峰峰高比值与Klason木质素含量和综纤维素含量的相关性。褐腐15周内,1736和1372cm-1处归属于综纤维素的吸收峰强度逐渐减弱,1510和1225cm-1处归属于木质素的吸收峰强度逐渐增强;但褐腐15周后,1736和1372cm-1处的吸收强度却开始略微增强,1510和1225cm-1处吸收强度略微下降。I1510/I1736,I1510/I1372,I1225/I1736和I1225/I1372与Klason木质素和综纤维素含量之间均存在非常好的线性相关,R2为0.96～0.99。I1736/I1510和I1372/I1510与综纤维素含量之间存在高度线性相关,R2=0.96。结果说明用红外光谱技术可以对木材褐腐过程中的综纤维素含量和Klason木质素含量进行准确分析。

FTIR studies of masson pine wood decayed by brown-rot fungi

Fourier transform infrared (FTIR) spectroscopy was used to study the chemical changes of masson pine (pinus massoniana lamb.) decayed by the brown-rot fungus Wolfiporia cocos (Schwein.) Ryvarden & Gilbn. for different durations up to 23 weeks. The ratios of height of the lignin/holocellulose and holocellulose/lignin IR peaks were measured, and the klason lignin content and holocellulose content of the sound wood and brown-rotted wood with different level of decay were analyzed by wet chemical methods. The relationship between the two chemical components and the ratios of IR peak height was also established. FTIR spectra showed that, during the first 15 weeks of decay, the intensity of absorption bands at 1 736 and 1 372 cm(-1) ascribed to holocellulose decreased gradually, accompanied by a successive increase in the intensity of band at 1 510 and 1 225 cm(-1) ascribed to lignin. However, the intensities of holocellulose bands at 1736 and 1372 cm(-1) had a little increase, and the intensities of lignin bands at 1 510 and 1 225 cm(-1) had a very slight decrease after 15 weeks of decay. There was a very good correlation between the ratios of height of the lignin/holocellulose (I1510/1736, I1510/I1372, I1225/I736 and I1225/I1372) and the klason lignin content or holocellulose content. The coefficients of determination for the klason lignin content and the holocellulose content were 0.97-0.99 and 0.96-0.97, respectively. High coeffieients of determination were also obtained between the holocellulose/ lignin peak height ratios and the holocellulose content (R2 = 0.96). The above results suggest that, in the system studied, the klason lignin content and holocellulose content of wood decayed to differnent levels could be determined with reasonable accuracy by the FTIR technology.