首页 | 本学科首页   官方微博 | 高级检索  
     检索      

互相关检测法在微弱信号检测中的应用
引用本文:冯晨,秦工,詹昊思,蔡婷.互相关检测法在微弱信号检测中的应用[J].电子测试,2016(17):65-66.
作者姓名:冯晨  秦工  詹昊思  蔡婷
作者单位:江汉大学物理与信息工程学院,湖北武汉,430056
摘    要:本文详细分析了如何利用互相关检测法检测出微弱信号,设计了一个基于单片机的微弱信号检测装置.该装置能在噪声源均方根值为1V±0.1V(峰峰值近似为6.6V)的环境下,把峰峰值在200mV-2V范围,频率在500Hz-2000Hz范围内的微弱信号幅值检测出来,检测误差在5%以内.

关 键 词:互相关检测法  微弱信号  检测装置  幅值  检测误差

Application of Cross-correlation Method in Weak Signal Detection
Abstract:This paper makes a close analysis about how to use the cross-correlation method to design a device based on single chip microcomputer.The device can detect the amplitude of the weak signal whose peak-peak value is in the range of 200 mv -2V and frequency is in the range of 500Hz – 2000Hz in the noise background where the root mean square value of noise source is 1V± 0.1V(Peak-peak value is approximately 6.6V). And the detection error is within 5%.
Keywords:cross-correlation method  weak signal  detection device  amplitude  detection error
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号