WO_3-TiO_2/SBA-15的制备及其光催化氧化脱硫性能

采用孔道内水解法制备了WO_3-TiO_2/SBA-15催化剂用于光催化氧化柴油脱硫,利用XRD、SEM、EDS、N2吸附-脱附、FT-IR、TG-DTA和UV-vis等技术对该催化剂进行了表征,考察了WO_3和TiO_2负载量、焙烧温度和焙烧时间对其光催化氧化脱硫性能的影响。结果表明,WO3和Ti O2负载量分别为1.6%和15%,焙烧温度500℃,焙烧时间为3 h条件所制备的催化剂性能最佳;在该条件下制备的WO_3-TiO_2/SBA-15催化剂仍保持SBA-15的六方介孔结构,模拟柴油的脱硫率高达87.9%,且具有良好的回收再生性能。

Preparation of WO3-TiO2/SBA-15 catalyst and its photocatalytic performance in oxidative desulfurization

WO₃-TiO₂/SBA-15 catalyst was prepared by inner-pore hydrolysis method;it was characterized by XRD, SEM, EDS, N₂ sorption, FT-IR, TG-DTA and UV-vis and used in the photocatalytic oxidative desulfurization of diesel oil. The effects of WO₃ and TiO₂ loading and calcination temperature and time on the performance of the WO₃-TiO₂/SBA-15 catalyst in its photocatalytic oxidative desulfurization were investigated. The results indicated that the optimum loadings of WO₃ and TiO₂ were 1.6% and 15%, respectively, and corresponding calcination temperature and time were 500℃ and 3h, respectively. Over the WO₃-TiO₂/SBA-15 catalyst prepared under the optimum conditions, in which the hexagonal mesoporous structure was well retained, the desulfurization rate of model diesel oil reached 87.9%. Moreover, the WO₃-TiO₂/SBA-15 catalyst also exhibited excellent reusability after regeneration.