| 圆坯连铸结晶器温度场模拟与坯壳厚度预测 |
| |
| 引用本文： | 姚曼,詹慧英,王旭东,郭亮亮,尹合壁,刘晓,于艳.圆坯连铸结晶器温度场模拟与坯壳厚度预测[J].北京科技大学学报,2007,29(11):1091-1095. |
| |
| 作者姓名： | 姚曼 詹慧英 王旭东 郭亮亮 尹合壁 刘晓 于艳 |
| |
| 作者单位： | 1. 大连理工大学材料科学与工程学院,大连,116024
2. 上海宝钢集团公司,上海,201900 |
| |
| 摘 要： | 基于连铸圆坯结晶器温度与热流实测数据,建立了连铸圆坯凝固的三维传热模型,计算出结晶器和铸坯的温度场,并得到铸坯的固相率与坯壳厚度分布情况.温度计算结果与实测数据符合较好,表明此数学模型能够较为准确地反映实际情况.讨论了拉速、浇注温度等因素对坯壳厚度的影响,并对利用模型计算与经验公式计算得到的坯壳厚度进行了对比.
|
| 关 键 词： | 连铸 圆坯 坯壳 温度场 数值模拟 圆坯连铸结晶器 温度场模拟 坯壳厚度 厚度预测 round mould continuous casting thickness shell prediction temperature field 公式计算 利用模型 影响 因素 浇注温度 拉速 分布情况 数学模型 结果 |
| 收稿时间： | 2006-07-15 |
| 修稿时间： | 2006-09-26 |
Simulation of temperature field and prediction of shell thickness in a continuous casting mould of round billets |
| |
| YAO Man,ZHAN Huiying,WANG Xudong,GUO Liangliang,YIN Hebi,LIU Xiao,YU Yan.Simulation of temperature field and prediction of shell thickness in a continuous casting mould of round billets[J].Journal of University of Science and Technology Beijing,2007,29(11):1091-1095. |
| |
| Authors: | YAO Man ZHAN Huiying WANG Xudong GUO Liangliang YIN Hebi LIU Xiao YU Yan |
| |
| Abstract: | Based on the measured data of mould temperature and heat flux, a three-dimensional transient heat-transfer model was developed to simulate the temperature field of a round billet in continuous casting, and the solid fraction and shell thickness of the billet were calculated. The results agree with the measured data, which indicates that the real process conditions can be well reflected by the model. The effects of casting speed and pouring temperature on the shell thickness were discussed, and the comparison of the model with experiential formulas in calculating the shell thickness was also carried out. |
| |
| Keywords: | continuous casting round billet shell thickness temperature field numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
