| Abstract: | Investigations were carried out on the polymer particle morphology obtained in the early stages of radiation-induced bulk polymerization of vinyl chloride with solvent added in small amounts over the temperature range of ?10 to 70°C under quiescent conditions. At low temperatures, when the polymerization is carried out in the absence of solvent, there is flocculation of irregular aggregates of two types depending on polymerization conditions: (i) small primary particles that remain finely dispersed and (ii) large flocs that undergo rapid sedimentation. By addition of increasing amounts of solvent a gradual change towards single small spherical particles that remain finely dispersed is obtained. With more than 3% w/w THF, spherical particles in latexlike dispersions are obtained in polymerizations at ?10 and 22.8°C, and show a small change in size with increasing amounts of THF. In the high-temperature range, 50–70°C, where spherical particles can be obtained in the absence of solvent, no significant changes are produced by addition of THF. The results are discussed in the terms of a marked increase in particle plasticization by the solvent, enabling the coalescence of flocculated particles of small size to occur also in polymerization at low temperature. |
