| Abstract: | Heat effects and structural transformations in amorphous crystallizable poly(ethylene terephthalate) (PET) during uniaxial stretching accompanied by neck formation, have been investigated by calorimetric and x-ray methods over a wide range of temperatures and deformation rates. At small deformation (not exceeding 1–2%) and at temperatures below the glass transition temperature of the polymer, PET behaves as an elastic body. Upon stretching at a constant rate, constant heat power is absorbed, heat effects during loading and unloading coincide completely, and no hysteresis is observed. At large deformations (of the order of 50%), cold drawing develops in this temperature range. The internal energy change in cold drawing is zero within experimental error. A periodic heat release during the self-oscillation regime of drawing PET corresponds to periodic changes in stress, in the rate of the neck formation, and in the appearance of the sample. The temperature limits of the region where crystallization resulting from an uniaxial drawing of the polymer is possible, have been determined, and the heat effect of this phase transition has been measured. Orientation crystallization develops only from 70 to 94°C. These limits are insensitive to changes in deformation rate within one decimal order. The structure of PET in this temperature range has been investigated. The heat of phase transition of orientation crystallization of PET has been determined from the relationship between the measured values of the internal energy change during this process and the limiting degree of crystallinity for the stretched samples. This heat proves to be 5.5 ± 0.1 cal/g. |
