Dependence of nanocrystalline SnO2 particle size on synthesis route

Very fine SnO₂ powders were produced by (a) slow and (b) forced hydrolysis of aqueous SnCl₄ solutions and (c) hydrolysis of tin(IV)-isopropoxide dissolved in isopropanol (sol-gel route) and then characterized by X-ray powder diffraction, Fourier transform infrared and laser Raman spectroscopies, TEM and BET. The XRD patterns showed the presence of the cassiterite structure. As found from XRD line broadening the crystallite sizes of all powders were in the nanometric range. TEM results also showed that the sizes of SnO₂ particles in all powders are in nanometric range. Very fine SnO₂ powders showed different features in the FT-IR spectra, depending on the route of their synthesis. The reference Raman spectrum of SnO₂ showed four bands at 773, 630, 472 and 86 (shoulder) cm⁻¹, as predicted by group theory. Very fine SnO₂ powders showed additional Raman bands, in dependence on their synthesis. The broad Raman band at 571 cm⁻¹ was ascribed to amorphous tin(IV)-hydrous oxide. The additional Raman bands at 500, 435 and 327 cm⁻¹ were recorded for nanosized SnO₂ particles produced by forced hydrolysis of SnCl₄ solutions. However, these additional Raman bands were not observed for nanosized SnO₂ particles produced by slow hydrolysis of SnCl₄ solution or the sol-gel route. The aggregation effects of nanosized particles were considered in the interpretation of the Raman band at 327 cm⁻¹. The method of low frequency Raman scattering was applied for SnO₂ particle size determination. On the basis of these measurements it was concluded that the size of SnO₂ particles was also in the nanometric range and that, the sol-gel particles heated to 400 °C consisted of several SnO₂ crystallites.