首页 | 本学科首页   官方微博 | 高级检索  
     检索      

倍频波长分离膜半波孔的消除
引用本文:马小凤,余祥,王英剑,邵建达,范正修.倍频波长分离膜半波孔的消除[J].强激光与粒子束,2005,17(Z1):155-158.
作者姓名:马小凤  余祥  王英剑  邵建达  范正修
作者单位:1. 中国科学院,上海光学精密机械研究所,光学薄膜技术研发中心,上海,201800;中国科学院,研究生院,北京,100039
2. 中国科学院,上海光学精密机械研究所,光学薄膜技术研发中心,上海,201800
基金项目:国家863计划项目资助课题
摘    要:指出了膜料色散、膜层折射率非均匀性以及膜厚控制误差积累等是导致半波孔产生的几个因素,其中膜层厚度周期性误差积累和敏感层厚度误差是导致半波孔的主要因素,还指出了半波孔的大小与膜系结构有关.借助计算机做了相应的数值计算,并从理论上进行了深入分析.针对这些因素采取相应的措施,设计和制备了倍频波长分离膜,有效地消除了半波孔.并给出了理论和实验光谱曲线,二者有很好的一致性.

关 键 词:倍频波长分离膜    半波孔    色散    折射率非均匀性
文章编号:1001-4322(2005)S0-0155-04
修稿时间:2004年11月22

Elimination of the half-wave hole for harmonic beam splitter
MA Xiao-feng,YU Xiang,WANG Ying-jian,SHAO Jian-da,FAN Zheng-Xiu.Elimination of the half-wave hole for harmonic beam splitter[J].High Power Laser and Particle Beams,2005,17(Z1):155-158.
Authors:MA Xiao-feng  YU Xiang  WANG Ying-jian  SHAO Jian-da  FAN Zheng-Xiu
Institution:MA Xiao-feng 1,2,YU Xiang1,WANG Ying-jian1,SHAO Jian-da1,FAN Zheng- xiu1
Abstract:The dispersion and refractive index inhomogeneity of film materials and error accumulation of layers thickness are all the factors that cause the half-wave hole for a harmonic beam splitter, among them the periodic error accumulation of layer thickness and sensitive layer error is the primary one. Furthermore, the stack structure is also related to the half-wave hole. With the aid of TFCALC the numerical calculations and theoretical analysis were performed. Measures are taken and a harmonic beam splitter was designed and fabricated. The half-wave hole was eliminated fundamentally. Both theoretical and experimental curves are given in this paper, which agree well with each other.
Keywords:Harmonic beam splitte  Half-wave hole  Dispersion  Refractive index inhomogeneity
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号