| 全浮动芯棒钢管连轧金属流动的有限元分析 |
| |
| 引用本文： | 赵志毅,齐秀美,苏惠超,任学平.全浮动芯棒钢管连轧金属流动的有限元分析[J].北京科技大学学报,2010,32(2). |
| |
| 作者姓名： | 赵志毅 齐秀美 苏惠超 任学平 |
| |
| 作者单位： | 1. 北京科技大学材料科学与工程学院,北京,100083
2. 宝山钢铁股份有限公司宝钢分公司钢管厂,上海,201900 |
| |
| 摘 要： | 结合生产实际,采用ABAQUS显式动力仿真平台,对宝钢140mm全浮动芯棒钢管连轧过程中金属的变形及流动规律进行了仿真分析.分析结果表明:金属的横向流动主要表现为从孔顶区域流向侧壁区域;金属的纵向延伸主要发生在孔顶区域,且钢管外壁金属相对内壁金属向前滑移.孔型侧壁区域金属的横向堆积及纵向延展不充分是导致荒管壁厚不均的主要原因.
|
| 关 键 词： | 钢管 连轧 芯棒 金属流动 有限元 |
Finite element analysis of metal flow during tube continuous rolling by a full float mandrel mill |
| |
| ZHAO Zhi-yi,QI Xiu-mei,SU Hui-chao,REN Xue-ping.Finite element analysis of metal flow during tube continuous rolling by a full float mandrel mill[J].Journal of University of Science and Technology Beijing,2010,32(2). |
| |
| Authors: | ZHAO Zhi-yi QI Xiu-mei SU Hui-chao REN Xue-ping |
| |
| Abstract: | Based on production practice, the ABAQUS explicit dynamic simulation platform was used to investigate the metal deformation and flow rule during tube continuous rolling by the Baosteel 140mm full float mandrel mill. The results show that the transverse metal flow is mainly from the groove top to sidewall, and the longitudinal metal extension occurs chiefly in the groove top area, while the outer wall metal of steel tubes slides forward relative to the inner wall metal. Transverse metal accumulation and longitudinal inadequate extension in the groove sidewall area are the main reasons to cause non-uniform wall thickness. Analysis |
| |
| Keywords: | steel tube continuous rolling mandrel metal flow finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
