| Abstract: | The temperature dependence of photoluminescence in Europium tris[3-(trifluoro-methylhydroxymethylene)-(+)-camphorate] (EuTFC) embedded in polymer films has been examined from 40 K down to 4.2 K with the goal of preparing sensor films for low-temperature thermal imaging. The behavior of EuTFC showed significant difference when based on polystyrene compared to poly(n-alkyl methacrylate)s. In poly(n-alkyl methacrylate)s prepared by standard methods for imaging applications, the photoluminescence is fully saturated below 30 K, whereas in polystyrene films there is a strong temperature dependence even down to 4.2 K. By optimizing the preparation procedure for films made of poly(butyl methacrylate) (PBMA) and poly(methyl methacrylate), also these polymers became very sensitive down to liquid helium temperature. The maximum temperature sensitivity of EuTFC in PBMA is found to be 1.0%/K at 4.2 K. The problem of delamination and cracking of the polymer film at cryogenic temperature is also avoided by the special preparation method. |
