Abstract: | Absolute resonant frequency measurements were made on gold-coated AT-cut quartz crystals with one face in contact with a series of liquids. The effect of surface roughness and liquid properties (viscosity and density) was analyzed in terms of a “trapped liquid” model. In this model, liquid present in surface imperfections is viewed as rigidly coupled mass. In some of the literature this density-dependent, but not viscosity-dependent, term is viewed as being additive to the hydrodynamic shift seen for a smooth surface. Data obtained using 1 μm and 5 μm surface finish crystals are inconsistent with the predictions of the trapped liquid model. This suggests hydrodynamic coupling between liquid internal and external to the crevices. Despite the lack of a theoretical model for the liquid motion, it is possible to compensate for frequency variations resulting from changing liquid properties and for roughness effects by making direct measurements of the resonant frequency difference between two crystals exposed to the same solution. This novel procedure works to the extent that the two crystals have similar surface topographies. Compensation is excellent for 1 μm finish crystals and good for 5 μm finish crystals. |