Simplified method for the Re-Os dating of molybdenite using acid digestion and isotope dilution ICP-MS

An analytical method was developed for Os-Re dating of molybdenite. The method is based on determination of Os and Re concentrations in molybdenite by isotope dilution inductively-coupled plasma mass spectrometry (ID-ICP-MS). Sample digestion and sample/spike equilibration were achieved by a two-stage autoclave-based procedure using a mixture of nitric and sulphuric acids. Os was separated from the sample digest by modified single-stage distillation of osmium tetraoxide (OsO₄) using elevated temperature and on-line addition of hydrogen peroxide. OsO₄(g) was trapped in a mixture of 0.05% thiourea in 0.05 M sodium hydroxide. An anion-exchange column was used to separate Re from excess Mo in the solution remaining after distillation. Os and Re isotope ratio measurements were performed by single-collector, double focusing inductively-coupled plasma mass spectrometry (ICP-MS) with on-line mass-bias correction. Typical instrumental precision was in the range 0.02-0.2% relative standard deviation (R.S.D.) depending on the analyte concentrations. Notorious Os memory effects in the ICP-MS introduction system were eliminated using 5% ammonia solution, both as matrix for final dilution of the trap mixture as well as for washing between the samples. The reproducibility of the entire analytical procedure was accessed by replicate dating of two molybdenite standards and three molybdenite separates, and was found to be in the range 0.87-1.52% R.S.D. Though accuracy of the method is limited by difficulties in evaluating exact concentration of Os in spike solution, ages obtained in the course of these work agrees well with previously published data.