| Abstract: | The influence of laser radiation on the formation of an austenitic grain and on the alloying ability of a solid solution of high-speed cutting steels is investigated using as an example the steel R18 subjected beforehand to various bulk heat treatments. Notice is taken of the role of laser tempering during the initial stage of heating to the temperature at which an austenitic transformation with release of secondary carbides takes place, accompanied by laser action of plastic de formation with formation of a corresponding structurally stressed state. The content, in the solid solution, of the main alloying element tungsten in the R18 high-speed steel is determined from Mössbauer measurements and from x-ray phase analysis data on the degree of the dissolution of the carbide phase in laser-action zone. Determination of the carbon content in the solid solution of the zones of laser action, yields data on the degree of the carbide-phase solution and on the displacement of the diffraction  -lines; these data can be attributed to anomalous diffusion of the carbon as the laser heating is accelerated.Quantum Physics Division, Kuibyshev Branch. Translation of Preprint No. 19, Lebedev Institute of Physics, Academy of Sciences of the USSR, Moscow, 1991. |
