首页 | 本学科首页   官方微博 | 高级检索  
     检索      

虚阴极为负载的磁绝缘线振荡器设计和研究
引用本文:孙会芳,董志伟,周海京,杨温渊.虚阴极为负载的磁绝缘线振荡器设计和研究[J].强激光与粒子束,2005,17(8):1126-1128.
作者姓名:孙会芳  董志伟  周海京  杨温渊
作者单位:北京应用物理与计算数学研究所,北京,100088;北京应用物理与计算数学研究所,北京,100088;北京应用物理与计算数学研究所,北京,100088;北京应用物理与计算数学研究所,北京,100088
基金项目:国家863计划项目资助课题
摘    要: 设计了S波段的MILO,工作频率为2.33 GHz,器件不容易产生模式竞争,适合于单模运行。进一步对MILO进行改造:阴极加入端面发射,使磁绝缘效果更好;收集极采用金属薄膜,利用磁绝缘电流形成虚阴极,充分发挥负载电流的磁绝缘作用,利用负载电流参与波束能量转换,使输出功率和效率进一步提高。通过优化设计的虚阴极MILO,在输入电压为450 kV,电流为45 kA时,最终得到2 GW的周期平均输出功率,效率高达10%。

关 键 词:MILO  负载二极管  虚阴极
文章编号:1001-4322(2005)08-1126-03
收稿时间:2004-08-13
修稿时间:2005-05-20

Design of MILO with vircator load
Sun Hui-fang,DONG Zhi-wei,Zhou Hai-jing,YANG Wen-yuan.Design of MILO with vircator load[J].High Power Laser and Particle Beams,2005,17(8):1126-1128.
Authors:Sun Hui-fang  DONG Zhi-wei  Zhou Hai-jing  YANG Wen-yuan
Institution:Institute of Applied Physics and Computational Mathematics, P.O. Box 8009, Beijing 100088, China
Abstract:An S-band MILO was designed by 2D particle-in-cell(PIC) electromagnetic code, based on the L-band hard-tube MILO of the Philips laboratory. The working frequency of the S-band MILO was 2.3 GHz. The design was further improved to increase the output power and efficiency. The emission increase from the cross section resulted in better magnetic insulation. A metal film was used to replace the conductor so that the load current, which had only supplied magnetic insulation, could be used to participate in the wave-beam energy transformation. The average output power in a period was 2 GW when the input voltage was 450 kV and the input current was about 45 kA. The efficiency was up to 10%.
Keywords:MILO  Loading-diode  Vireator
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号