首页 | 本学科首页   官方微博 | 高级检索  
     

FAAS法测定ZYSP喷金料中高含量锡
引用本文:伍正清,李殷青,秦建洪. FAAS法测定ZYSP喷金料中高含量锡[J]. 理化检验(化学分册), 1999, 0(5)
作者姓名:伍正清  李殷青  秦建洪
作者单位:广西师范大学理科实验中心,广西师范大学理科实验中心,桂林市无线电八厂 桂林541004,桂林541004
摘    要:用盐酸(1+1)和硝酸(1+1)混合液溶解ZYSP喷金料,并采用富火焰原子吸收法在锡的次灵敏线286.3nm处对样液中高含量的锡进行直接测试。线性范围0~250mg·L~(-1),其灵敏度为3.10mg·L~(-1)/1%吸收,回收率为100.1%~103.7%,相对标准偏差不大于3.5%,并用标准加入法进行对照。

关 键 词:ZYSP喷金料  高含量锡的测定  富然火焰  火焰原子吸收法

FAAS DETERMINATION OF HIGH CONTENT OF TIN IN ZYSP SPUTTERING ALLOY
Wu Zhengqing and Li Yingqing. FAAS DETERMINATION OF HIGH CONTENT OF TIN IN ZYSP SPUTTERING ALLOY[J]. Physical Testing and Chemical Analysis Part B:Chemical Analgsis, 1999, 0(5)
Authors:Wu Zhengqing and Li Yingqing
Abstract:A method for the determination of high content of tin in a sputtering alloy by FAAS is reported in this paper. The sample is dissolved in an acid mixture of HCI(1 + 1) and HNO_3(1 + 1). Tin is then determined by FAAS at the wavelength of 286. 3nm using fuel-rich flame. The linear relationship between tin concentrations and absorbances holds over the range 0 to 250mg of tin per liter. The sensitivity of the method is found to be 3. l0mg per liter for an absorbance of 1%. A recovery of 100. 1 %~103. 7% is found by the standart addition method and the RSD found in smaller than 3. 5%.
Keywords:Sputtering alloy   Determination of high content of tin   Fuel-rich flame   FAAS
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号