Influence of edge propagation on downward flame spread over three-dimensional PMMA samples

This systematic experimental study measures the effect of flame propagation along vertical edges on the overall downward spread of flames using Polymethyl Methacrylate (PMMA). Samples with a wide range of regular cross-sections – from triangular through octagonal – as well as irregular ones, have been used to test a large variation of internal angles. A MATLAB-based tool was used to calculate instantaneous spread rate for central and edge flames. The edge flame is shown to significantly enhance the spread rate, as much as five times, in respect to samples with no edges. This amplification is shown to depend primarily on the internal angle at the edge (the smaller the angle, the faster the flame) and fuel thickness, and not on other factors such as aspect ratio or cross-sectional area. Using a phenomenological argument, the edge propagation rate is correlated to the spread rate over an equivalent cylindrical fuel (the limiting shape with infinite edges) with an effective radius obtained from the geometry of the edges and the diffusion length scale of the solid phase. A formula for flame spread over cylindrical fuel from the literature is used to link the new results to existing models. Both thick and thin limits are shown to encompass the wide range of three-dimensional spread rate data within the effective radius (the independent variable), which can be determined from the known parameters. Based on these results, different types of cross-sectional areas can be sorted in the order of their inherent fire safety characteristics.