Importance of pre-ionisation for the non-chain discharge-pumped HF laser

The importance of pre-ionisation for the non-chain discharge-pumped HF laser is studied through experiments on an X-ray photo-triggered laser using mixtures of Ne, SF₆, and ethane. The discharge dynamic in Ne/SF₆ mixtures or pure SF₆, as well as the stabilisation effect induced by C₂H₆ and consequences for the laser performance, are investigated for pre-ionisation electron density values, n_eo, ranging from 10⁶ cm^-3 up to 10⁹ cm^-3, as well as for the so-called discharge self-breakdown mode. Without ethane, the minimum n_eo value which is needed to complete 100% homogeneous charge deposition in the plasma is a very sharply increasing function of the SF₆ pressure. This hinders performance optimisation when the molecule used to react with F-atoms, for instance H₂, has no effect on the discharge dynamic. The minimum ethane partial pressure that is needed to stabilise the discharge depends on n_eo, the pumping pulse duration, the deposited electric charge, and the SF₆ pressure. Discharges in Ne/SF₆ can be much more efficiently stabilised by addition of a small amount of ethane than by an increase of n_eo. A pre-ionisation density as low as 10⁶ cm^-3 is sufficient to achieve the maximum laser energy value, but total suppression of the pre-ionisation has a detrimental effect on the active medium homogeneity. Received: 30 May 2000 / Revised version: 9 October 2000 / Published online: 9 February 2001