Corrosion and passivation behavior of Mg-Zn-Y-Al alloys prepared by cooling rate-controlled solidification |
| |
Authors: | Michiaki Yamasaki Shogo IzumiYoshihito Kawamura Hiroki Habazaki |
| |
Institution: | a Department of Materials Science, Kumamoto University, 2-39-1, Kurokami, Kumamoto 860-8555, Japan b Division of Materials Chemistry, Faculty of Engineering, Hokkaido University, N13-W8, Sapporo 060-8628, Japan |
| |
Abstract: | Highly corrosion-resistant nanocrystalline Mg-Zn-Y-Al multi-phase alloys have been prepared by consolidation of rapidly solidified (RS) ribbons. The relation between corrosion behavior and microstructure evolution of Mg-Zn-Y-Al alloys with a long period stacking ordered phase has been investigated. In order to clarify the influence of rapid solidification on the occurrence of localized corrosion such as filiform corrosion, several Mg96.75Zn0.75Y2Al0.5 (at.%) alloys with different cooling rates are fabricated by the gravity casting, copper mould injection casting and melt-spinning techniques and their corrosion behavior and microstructures are examined by the salt water immersion test, electrochemical measurements, GDOES, XRD, SEM and TEM. To clarify the effect of aluminium addition on the improvement in corrosion resistance of the alloys, several Mg97.25−xZn0.75Y2Alx alloys with different aluminium contents are fabricated by consolidating RS ribbons and the formation of corroded films on the Mg-Zn-Y-Al alloys have been investigated. Rapid solidification brings about the grain refinement and an increase in the solid solubility of zinc, yttrium and aluminium into the magnesium matrix, enhancing microstructural and electrochemical homogeneity, which in turn enhanced corrosion resistance. The addition of aluminium to magnesium can modify the structure and chemical composition of surface films and improves the resistance to local breakdown of the films. |
| |
Keywords: | Magnesium alloy Yttrium Aluminium Cooling rate Filiform corrosion Passivation |
本文献已被 ScienceDirect 等数据库收录! |
|