| 叶尖喷气影响低速离心压气机特性的数值分析 |
| |
| 引用本文： | 耿少娟,朱俊强,戴冀,黄伟光. 叶尖喷气影响低速离心压气机特性的数值分析[J]. 工程热物理学报, 2006, 27(3): 411-413 |
| |
| 作者姓名： | 耿少娟 朱俊强 戴冀 黄伟光 |
| |
| 作者单位： | 1. 中国科学院工程热物理研究所,北京,100080;中国科学院研究生院,北京,100039
2. 中国科学院工程热物理研究所,北京,100080 |
| |
| 摘 要： | 本文采用数值模拟方法研究了进口叶尖喷气对低速离心压气机稳定工作范围的影响。计算讨论了机匣开缝和机匣安装喷嘴两种喷气方案,通过改变喷气量、喷气角、气流偏角以及喷嘴的周向布置研究不同喷气形式对压气机特性的影响。结果显示两种喷气方案均可起到拓宽压气机稳定工作范围的作用,各参数间存在最优组合使喷气的扩稳效果最佳。
|
| 关 键 词： | 数值模拟 离心压气机 喷气 |
| 文章编号： | 0253-231X(2006)03-0411-03 |
| 修稿时间： | 2005-12-07 |
NUMERICAL STUDY OF THE EFFECTS OF STEADY TIP INJECTION ON THE PERFORMANCE OF LOW-SPEED CENTRIFUGAL COMPRESSOR |
| |
| GENG Shao-Juan,ZHU Jun-Qiang,DAI Ji,HUANG Wei-Guang. NUMERICAL STUDY OF THE EFFECTS OF STEADY TIP INJECTION ON THE PERFORMANCE OF LOW-SPEED CENTRIFUGAL COMPRESSOR[J]. Journal of Engineering Thermophysics, 2006, 27(3): 411-413 |
| |
| Authors: | GENG Shao-Juan ZHU Jun-Qiang DAI Ji HUANG Wei-Guang |
| |
| Abstract: | The CFD Method is applied to study the effects of steady tip injection on the stall boundary of low speed centrifugal compressor. Schemes of injecting air through a slot in the casing or injectors fixed on the casing are discussed. The influence of air injection on the performance of compressor is analyzed by altering the mass flow rate, injection angle, yaw angle and collocation of injectors. The results show that both injection schemes can push stall boundary to a smaller mass flow rate and the effect of air injection can be optimized if the parameters are disposed properly. |
| |
| Keywords: | numerical simulation centrifugal compressor air injection |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
