首页 | 本学科首页   官方微博 | 高级检索  
     

同轴快沿脉冲源研制与测试
引用本文:何小平, 汤俊萍, 孙蓓云, 等. 同轴快沿脉冲源研制与测试[J]. 强激光与粒子束, 2006, 18(03).
作者姓名:何小平  汤俊萍  孙蓓云  邱爱慈  李静雅  王海洋
作者单位:1.西北核技术研究所, 西安 71 0024;;;2.西安交通大学 电气学院, 西安 71 0049
摘    要:利用脉冲高压陶瓷电容器和高气压小间隙开关,研制了60 kV同轴式高压快沿脉冲源。利用自行研制的薄膜式电容分压器和同轴式电阻分压器对快沿脉冲源的输出参数进行测量,分析了薄膜式电容分压器的测试原理,对电容分压中二级电阻分压器元件的参数进行了优化。当脉冲源负载为50 W时,测得脉冲源输出电压的前沿小于2.3 ns,半高宽约28 ns,符合IEC电磁脉冲的最新标准。

关 键 词:脉冲源   EMP   电容分压器   电阻分压器

Development and test of 60 kV coaxial fast rising pulse source
he xiao-ping, tang jun-ping, sun pei-yun, et al. Development and test of 60 kV coaxial fast rising pulse source[J]. High Power Laser and Particle Beams, 2006, 18.
Authors:he xiao-ping  tang jun-ping  sun pei-yun  qiu ai-ci  li jing-ya  wang hai-yang
Affiliation:1. Northwest Institute of Nuclear Technology,P.O.Box 69-10,Xi’an 710024,China;;;2. School of Electrical Engineering,Xi’an Jiaotong University,Xi’an 710049,China
Abstract:Based on ceramic pulse capacitors and high press gas switch, a 60 kV coaxial fast rising pulse source was developed. A foil capacitive divider and a resistive divider were developed for measuring the output voltage of the fast rising pulse source. The test result indicats that the rising time of the output voltage of the pulse source is less than 2.3 ns and the pulse width is about 28 ns with a 50 W dummy load. This result agrees with the newest EMP standard of IEC.
Keywords:pulse source  emp  capacitive divider  resistive divider
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号