| Abstract: | The dissociation of molecular iodine in 40 MHz-RF discharge was studied experimentally. This generation of atomic iodine is
aimed at use in oxygen-iodine lasers. The discharge was ignited in a mixture of I2 + buffer gas fast-flowing through the cylindrical chamber and the discharge products were injected into a supersonic flow
of nitrogen. The atomic iodine number density was measured in a low-pressure cavity after mixing with nitrogen and the dissociation
fraction was calculated related to the input I2 flow rate. The dissociation fraction of 46.2% was achieved at 0.22 mmol/s of I2 and 7 mmol/s of Ar and RF power of 500 W. Argon and helium were used as a buffer gas; discharge stability and dissociation
efficiency were better with argon. At the I2 flow rate corresponding to the operation of a 1 kW chemical oxygen-iodine laser, the dissociation fraction was about 20%.
The dissociation efficiency (the fraction of absorbed energy used for the dissociation) significantly decreased with increasing
in the specific energy. At a reasonable I2 flow rate (0.32 mmol/s), the maximum achieved efficiency was 8.5% and the corresponding energy cost was 8.9 eV per dissociating
of one I2 molecule. The input energy of more than 3 kJ per 1 mmol of I2 is needed for dissociating at least 50% of I2. The obtained dependencies on the gas flow rates infer a good chance for scaling-up of the tested RF discharge generator
for the intended application. |
