A Catalytic Method for Determining Cadmium(II), Nickel(II), and Zinc(II) Inhibitor Metals

The inhibitory effect of Cd(II), Ni(II), and Zn(II) on the oxidation of 3,3′,5,5′ -tetramethylbenzidine with periodate was detected. The optimum reaction conditions were found, and the procedures were developed for determining 1 × 10⁻² to 10 μg/mL Cd(II), Ni(II), and Zn(II) in solution. The indicator reaction was performed on a number of supports. The maximum inhibitory effect was observed on silica gel-based plates for TLC. Procedures for determining 6 × 10⁻³ to 0.4 μg of these metals were developed. Silica gel plates with the immobilized reagent for cadmium (bromobenzothiazo) were used to preconcentrate cadmium. A selective test procedure was developed for determining 1 × 10⁻⁴ −3 × 10⁻³ μg/mL cadmium with the visual detection of the process rate. Upon the introduction of dimethylglyoxime into the indicator reaction, the inhibitory effect of nickel changed to its promoting effect and the detection limit for nickel was lowered. A procedure was developed for determining 3 × 10⁻⁴ −3 × 10⁻³ μg/mL nickel in solution and 7 × 10⁻³−4 × 10⁻¹ μg nickel on the surface of Sorbfil plates. An assumption was made about the reasons for the inhibitory effect of metal ions on the oxidation of aryl diamines with periodate.__________Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 6, 2005, pp. 662–669.Original Russian Text Copyright © 2005 by Beklemishev, Kiryushchenkov, Stoyan, Dolmanova.