首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于DDS技术的正弦信号发生器设计
引用本文:洪远泉,夏新恩,吴丽珠.基于DDS技术的正弦信号发生器设计[J].韶关学院学报,2006,27(12):53-57.
作者姓名:洪远泉  夏新恩  吴丽珠
作者单位:韶关学院,信息工程学院,广东,韶关,512005
摘    要:采用DDS芯片AD9851,产生1 kHz~10 mHz范围、频率步进100 Hz可调、输出峰峰值在6 V的正弦波基本信号.以AVR单片机Atmega16为控制核心,结合FPGA辅助逻辑控制电路(产生1 kHz的正弦调制信号和二进制基带序列信号),对实现的正弦波基本信号进行幅度、频率、相位调制和调制度及频偏的程序控制.该设计具有频带宽、精度高、性能稳定、成本低和操作界面友好等特点.可作为教具和科研用仪器.

关 键 词:数字频率合成  FPGA  AVR单片机  信号调制
文章编号:1007-5348(2006)12-0053-05
收稿时间:05 23 2006 12:00AM
修稿时间:2006年5月23日

Sine signal generator design based on DDS
HONG Yuan-quan,XIA Xin-en,WU Li-zhu.Sine signal generator design based on DDS[J].Journal of Shaoguan University(Social Science Edition),2006,27(12):53-57.
Authors:HONG Yuan-quan  XIA Xin-en  WU Li-zhu
Abstract:The design use DDS chip AD9851 to generate sine wave,whose frequency is from 1 Hz to 10 MHz,frequency stepper is 100 Hz and peak value is around 6 V. It use AVR MCU Atmega 16 as the control unit.MCU combine with assistant logic control circuit with FPGA which generate sin modulated signal of 1 kHz frequency and binary baseband serial signal to control the peak,frequency,phase,modulate coefficient and frequency stepper of sine wave with program.It has the virtue of wide baseband,high precision,stabilization,low cost and fine interface.The production can use as realia and scientific research instrument.
Keywords:DDS  FPGA  AVR MCU  signal modulate  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号