Multielement XRF Semimicroanalysis of Pb(Zr,Ti)O3 Type Ferroelectric Ceramic Materials Doped with Pb(Nb,Mn)O3 and Bi2O3 by the Thin Layer Method |
| |
Authors: | Rafa? Sitko Beata Zawisza Jerzy Jurczyk Dariusz Bochenek Ma?gorzata P?oñska |
| |
Institution: | (1) Institute of Chemistry, Silesian University, 40-006 Katowice, Poland, PL;(2) Department of Material Science, Silesian University, 41-200 Sosnowiec, Poland, PL |
| |
Abstract: | A method of wavelength-dispersive XRF analysis of Pb(Zr,Ti)O3 type ferroelectric ceramics doped with Pb(Nb,Mn)O3 and Bi2O3 is presented. The major elements Pb, Zr, Ti and minor elements Nb, Mn, Bi were determined. Matrix effects were minimized by using the thin layer method. Standards of the same chemical composition but varied masses were prepared to simplify calibration. To minimize errors resulting from inhomogeneity of a mass per unit area, the internal standard was used. Preparation of the sample consisted in digesting 25mg of the materials (with nickel as the internal standard) in sulfuric acid, evaporating to dryness and digesting in nitric acid and hydrogen peroxide, filling up to 25mL, and dropping 0.5mL of the solution onto a substrate. Standard samples were prepared by dropping different amounts of the multielement solution onto the substrate. The residual standard deviation for the reference sample of mass from 0.25mg to 0.7mg was within the range of 0.001–0.009mg (correlation coefficient 0.998–0.999) for major elements and within the range of 0.00003–0.0009mg (correlation coefficient 0.989–0.993) for minor elements. The detection limits for 0.5mg samples were within the range of 0.015%–0.35% for manganese and zirconium, respectively. |
| |
Keywords: | : XRF thin layer analysis ferroelectrics PZT lead titanate zirconate solid solution |
本文献已被 SpringerLink 等数据库收录! |
|