首页 | 本学科首页   官方微博 | 高级检索  
     

边界条件对双模量叠层板大挠度弯曲的影响
引用本文:黄小清,董万林. 边界条件对双模量叠层板大挠度弯曲的影响[J]. 华南理工大学学报(自然科学版), 1988, 0(3)
作者姓名:黄小清  董万林
作者单位:华南理工大学工程力学系,华南理工大学工程力学系
摘    要:本文用动力松弛法(DRM)求解了两层正交铺设双模量叠层方板在三种边界条件下的非线性弯曲问题。文中对DRM的阻尼系数的确定方法作了改进;指出了使用Bert模型计算各点的刚度时应考虑该点曲率的各种组合情况;给出了受正弦载荷和均布载荷作用的两种双模量复合材料叠层板的数值结果,得出了一些有用的结论。

关 键 词:叠层板  双模量复合材料  非线性弯曲  动力松弛法

EFFECTS OF BOUNDARY CONDITION ON THE NONLINEAR BENDING OF PLATES LAMINATED OF BIMODULAR COMPOSITE MATERIALS
Huang Xiaoqing and Dong Wanlin Dept.of Eng.Mech.,South China Univ.of Tech.. EFFECTS OF BOUNDARY CONDITION ON THE NONLINEAR BENDING OF PLATES LAMINATED OF BIMODULAR COMPOSITE MATERIALS[J]. Journal of South China University of Technology(Natural Science Edition), 1988, 0(3)
Authors:Huang Xiaoqing  Dong Wanlin Dept.of Eng.Mech.  South China Univ.of Tech.
Abstract:In this paper,Dynamic-Relaxation Method(DRM)has been adopted to investigate the problem of nonlinear bending of two- layer cross-ply square plates laminated of bimodular composite materials for three types of boundary condition.In the present paper the approach of estimating damping factor for DRM has been improved and it is indicated that various combinatorial cases of the curvature of each nodal point must be considered in using the Bert modal for calculating stiffness of the nodal point.The numeri- cal results are given for the plates laminated of two kinds of bimodular composite materials under sinusoidally distributed or uniformly distributed transverse loads and some useful conclusions are reached.
Keywords:laminated plates  bimodular composite materials  nonlinear bending  Dynamic Relaxation Method
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号