首页 | 本学科首页   官方微博 | 高级检索  
     

ANSYS仿真激光切割氧化锌纳米线
引用本文:张恭轩,李静,焦扬. ANSYS仿真激光切割氧化锌纳米线[J]. 应用光学, 2011, 32(6): 1245-1250. DOI: 10.5768/JAO201132.0607003
作者姓名:张恭轩  李静  焦扬
作者单位:中国科学技术大学 工程学院 精密机械与精密仪器系,安徽 合肥 230027
摘    要: 以脉冲高斯激光为光源,直径在500 nm~1 000 nm、长度10 μm的一维氧化锌材料为对象,采用有限元分析软件ANSYS建立了激光切割氧化锌纳米线的热力学仿真模型,并采用生死单元技术对超过熔点的单元进行处理,得到不同激光工作参数和氧化锌纳米线直径下的温度分布场和切割形貌。讨论了纳米线直径和聚焦光斑相对纳米线的位移对切割的影响,纳米线直径越大允许的激光离焦量越小;当无离焦或负离焦较小时,切割纳米线产生的形貌较为理想。

关 键 词:ANSYS  激光切割  氧化锌纳米线  温度场

ANSYS simulation of laser cutting ZnO nanowires
ZHANG Gong-xuan,LI Jing,JIAO Yang. ANSYS simulation of laser cutting ZnO nanowires[J]. Journal of Applied Optics, 2011, 32(6): 1245-1250. DOI: 10.5768/JAO201132.0607003
Authors:ZHANG Gong-xuan  LI Jing  JIAO Yang
Affiliation:Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
Abstract:Based on the pulsed Gaussian laser as light source and one-dimensional ZnO materials with 500 nm ~ 1000 nm diameter and 10 μm length as target, the finite element analysis software ANSYS was used to establish the thermodynamic simulation model of laser cutting ZnO nanowires. The birth-death element technology was adopted to process the unit which temperature was above the melting point. The temperature distribution field and the cutting morphology were obtained, as the laser working parameters and ZnO nanowire diameters changed. The influence of the nanowire diameter and the focusing spot displacement relative to the nanowires on laser cutting was discussed. The results show that the larger the nanowire diameter is, the smaller the tolerance of the laser defocus amount is; when the defocus amount is zero or the negative defocus is small, a better cutting morphology is obtained.
Keywords:ANSYS  laser cutting  ZnO nanowire  temperature field  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《应用光学》浏览原始摘要信息
点击此处可从《应用光学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号