首页 | 本学科首页   官方微博 | 高级检索  
     检索      

USB数据传输中缓冲结构的硬件实现
引用本文:蒋志迪,刘尉悦,李福翠.USB数据传输中缓冲结构的硬件实现[J].宁波大学学报(理工版),2007,20(1):1-4.
作者姓名:蒋志迪  刘尉悦  李福翠
作者单位:宁波大学,信息科学与工程学院,浙江,宁波,315211
基金项目:宁波大学校科研和教改项目
摘    要:嵌入式系统中采用USB接口与外界进行数据交换,为了提高系统处理数据的效率和性能,本文针对USB接口数据传输的缓冲结构进行探讨,根据USB数据传输的特点,提出基于单一存储的缓冲结构,实现USB模块与系统的无缝衔接,同时节省了系统资源.该方案通过FPGA平台实现,验证了其在嵌入式系统数据传输中是有效可行的.

关 键 词:嵌入式系统  数据传输  缓冲结构  USB  数据传输  缓冲结构  硬件实现  Transfer  Data  Structure  Buffer  Implementation  验证  平台  FPGA  方案  系统资源  无缝衔接  模块  存储  性能  效率  处理数据  数据交换
文章编号:1001-5132(2007)01-0001-04
修稿时间:2006-11-11

Hardware Implementation of Buffer Structure in USB Data Transfer
JIANG Zhi-di,LIU Wei-yue,LI Fu-cui.Hardware Implementation of Buffer Structure in USB Data Transfer[J].Journal of Ningbo University(Natural Science and Engineering Edition),2007,20(1):1-4.
Authors:JIANG Zhi-di  LIU Wei-yue  LI Fu-cui
Institution:Faculty of Information Science and Engineering, Ningbo University, Ningbo 315211, China
Abstract:Embedded system communicates with the peripherals using USB interface. In order to improve the efficiency and performance of data processing, in this paper the buffer structure of data transfer in USB interface of embedded system has been investigated. From the features of USB data transfer, a single-storage-based buffer structure is proposed to implement the seamless interface between USB modular and system which simultaneously saves the hardware resources. The implementation on FPGA platform has suggested that the proposed scheme is effective and feasible for data transfer in the embedded systems.
Keywords:embedded system  data transfer  buffer structure  USB
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号