New Pool Boiling Heat Transfer in the Presence of Low-Frequency Vibrations Into a Vertical Cylindrical Heat Source |
| |
| Authors: | H. Atashi A. Alaei R. Aeinehvand S. K. Rahimi |
| |
| Affiliation: | 1. Department of Chemical Engineering, University of Sistan and Baluchestan, Zahedan, Iran;2. Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran;3. Materials Science Centre, School of Materials, University of Manchester, Manchester, UK |
| |
| Abstract: | A vertical cylinder was applied as a heat source into a water pool; the vibrations were imposed into the heater with different heat fluxes, and the frequencies were adjusted at 10, 15, 20, and 25 Hz. An imaging system was employed to observe the produced bubbles around the cylindrical heat source. The results showed that the boiling heat transfer was enhanced under the vibrations with a shorter transient process, and the wall temperature also decreased. The best enhancement ratio was achieved at the frequency of 25 Hz and a heat flux value of 30 kW/m2 as a consequence of imposed vibrations. |
| |
| Keywords: | pool boiling cylindrical heat source low-frequency vibration heat transfer coefficient |
|
|
