| 波纹内导体返波振荡器的热腔特性 |
| |
| 引用本文： | 于新华,蒙林,鄢扬,顾小卫,蒲小亮.波纹内导体返波振荡器的热腔特性[J].强激光与粒子束,2008,20(6). |
| |
| 作者姓名： | 于新华 蒙林 鄢扬 顾小卫 蒲小亮 |
| |
| 作者单位： | 电子科技大学 物理电子学院, 成都 610054 |
| |
| 基金项目： | 国家自然科学基金
,
国防重点实验室基金 |
| |
| 摘 要： | 导出了波纹内导体同轴慢波结构热腔色散方程，研究了周期波纹深度、电子注平均半径、电子注电流及加速电压对波纹内导体慢波结构的高频场时间增长率的影响。结果表明：慢波结构周期减小、波纹深度加深、电子注平均半径减小、电子注电流增大、加速电压增大均会使高频场时间增长率增大。建立了粒子模型并应用PIC粒子模拟软件进行仿真，对各影响参数进行优化，结果表明：当加速电压为0.5 MV、电子束电流85 kA、波纹周期长度4.4 cm、波纹幅度为0.23 cm、内轴平均半径为2.9 mm和外壁内径为4.4 cm时，可获得10 GHz，1.1 GW效率约25%的单频微波输出。
|
| 关 键 词： | 返波振荡器 波纹内导体 热腔特性 粒子模拟 高频场 时间增长率 |
| 收稿时间： | 1900-01-01; |
Hot characteristics of corrugated-inner-conductor backward-wave oscillator |
| |
| YU Xin-hua,MENG Lin,YAN Yang,GU Xiao-wei,PU Xiao-liang.Hot characteristics of corrugated-inner-conductor backward-wave oscillator[J].High Power Laser and Particle Beams,2008,20(6). |
| |
| Authors: | YU Xin-hua MENG Lin YAN Yang GU Xiao-wei PU Xiao-liang |
| |
| Institution: | School of Physical Electronics, University of Electronic Science and Technology, Chengdu 610054, China |
| |
| Abstract: | Hot dispersion equation is derived and solved of the slow-wave structure(SWS) of the corrugated-inner-conductor backward-wave oscillator(CICBWO), the particle-in-cell(PIC) model is constructed and calculated by PIC code. The results suggest an high frequency microwave is obtained with a frequency of 10 GHz, an average output power of 1.1 GW and a power efficiency of 25% when the acceleration voltage is 0.5 MV, the electronic current 8.5 kA, the corrugated period 4.4 cm, the corrugated magnitude 0.23 cm, the inner radius 2.9 cm and the inner radius of the outside wall 4.4 cm. |
| |
| Keywords: | Corrugated-inner-conductor Hot characteristic Particle-in-cell High frequency field Temporal increment |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|
