|
|||||
|
|
Effects of O2/Ar flow ratio on the alcohol sensitivity of tin oxide film |
|
| Authors: | Hsiao-Ching Lee Weng-Sing Hwang Yang-Ming Lu |
| Institution: | a Department of Materials Science and Engineering, National Cheng Kung University, No.1, Ta-Hsueh Road, Tainan 701, Taiwan b Department of Engineering Science, National Cheng Kung University, Tainan, Taiwan c Department of Electronics Engineering, Kun Shan University of Technology, Tainan, Taiwan |
| Abstract: | The aim of this study is to find the effects of oxygen flow rate during manufacturing on the sensitivity of SnO2 (tin oxide) thin films to ethanol (C2H5OH). In this study, an RF sputtering process was employed to fabricate the SnO2 thin films. The SnO2 was deposited on gold electrode silicon microchips. A target composed of SnO2 doped with 1 at.% Li was used with a working pressure of 3 mTorr. The RF power was fixed at 150 W. The reaction gas was a mixture of argon and oxygen. The total flow rate was constant at 50 sccm with the O2/Ar ratio varying from 0.2 to 0.8. An annealing heat treatment was employed at 400 °C for 1 h to stabilize the properties of the films. The sensitivity of the film to ethanol was tested by placing the micro-reactor device on a hot plate, heated to 300 °C, and measuring the variation of electrical resistivity of the film with and without the presence of ethanol. The results show that an O2/Ar flow ratio of 0.2 produces films with the highest ethanol sensitivity. Before heat treating, the ethanol sensitivity was 126. After heat treating at 400 °C for 1 h, the sensitivity decreased to 104. |
| Keywords: | Gas sensor Ethanol Tin oxide Sensitivity |
| 本文献已被 ScienceDirect 等数据库收录！ | |